| Flying kites simply for the fun of it. |
Kiting News, Events, Information and Commentary
| |||||
|
HOME
Welcome
News
Journal
Reviews
Kite Making
People
Festivals
Groups
Webcams
Shops
Manufacturers
Colorizers
Videos
Pictures
Our Kites
Wish List
Den
|
Kite JournalThursday April 25th, 2013Lines Drawnwith a fin to the leftTwenty-eight little black lines. They went much faster than I expected, and I enjoyed sewing each one. It's like a game of art. Since essentially i am just practicing here, there was little stress as to what the final result would be, so I made sure to have fun with it. Sewing black thread onto black fabric covers up most mistakes quite well, nonetheless there were many times that i would get the seam ripper and take the stitching back out to correct some errant thread attack. Like I have said I am finding sewing quite enjoyable. They are way more things going on than you may think. There's all the settings like stitch length and width, and all that stuff, but there's also the cool pedal. Pressing down on the pedal makes the motor spin. It's like a gas pedal because it stiches faster the further down you press. But fast isn't what is cool, what is cool is going slow. I like one or two stiches a second, ideally. At least for stuff like this. It's almost like you can speed up or slow down time. Keeping the machine going at the pace I want isn't always easy as it speeds away when starting up sometimes. But you can always grab the motor by hand and keep it from racing. You can even turn the motor by hand if you only want to put down a few stitches. Here is a pic of a long line being attached. You can see the hole cut for the side fin. Also notice the scissor cut hemline folded under on the white strip. The pencil lines from tracing the pattern are very visible as well. ![]() ![]() ![]() ![]() Here the side pieces await eyes and fins. ![]() Here you can see the parts sheet with the precut line parts removed. ![]() Here the fabric is folded and two layers are cut together for an eye. The doubled fabric should help to make the eye look whiter. ![]() Hot cutting makes the template edges stick to the cutting board. The fabic pulls away freely leaving the eye stuck underneath. ![]() ![]() ![]() ![]() The eye pulls free of the template. The two layers of fabric were sealed together during the hotcutting process. ![]() The remining parts are ready to be attached. Here you can also see a paper model of half a fish. ![]() All the templates used for the lines and the fins ready to be put away. ![]() Eyes and fins are laid in place. It is starting to look like a clownfish! ![]() ![]() Here the eye has been sewn on and the left fin is partially attached. ![]() It won't be long now. More tomorrow. |
Kites Flown: Kites Flown:iFlite #1261 (orange vented) | |||
| © 2019 windstock.net | |||||